Water Quality InformationWritten By Actual Experts
RSSPFAS: Everywhere We Look, We Find It
Military Bases Have High Concentrations of PFAS Chemicals
***Updated 8/29/18 to include video***
Analies Dyjak | Policy Nerd
Per and Polyfluoroalkyl Substances (PFAS) have been receiving a ton of media attention throughout this past year. PFAS are a category of toxic contaminants that have invaded public and private drinking water systems across the entire country. Military bases are extremely susceptible to this type of contamination because of necessary on-base activities. If you would like to learn more about what PFAS are, their health effects, and if they're regulated, please click here.
Why Do Military Bases Have High Concentrations of Per and Polyfluoroalkyl Substances (PFAS)?
Military bases have historically had issues with pollution, due to the nature of on-base activities. Municipal fire departments also travel to nearby military bases because they provide an open, secure area to train. So not only are military personnel being directly exposed to PFAS chemicals in water, but so are local fire departments. The Department of Defence isn’t necessarily to blame for the high rates of contamination of PFAS on military bases. The Manufacturers of PFAS-containing fire fighting foam who actively sell to the DOD are greatly at fault. Because there is no effective alternative on the market, the military has no choice but to continue purchasing and using these products. Unlike many other countries, the United States doesn’t use the precautionary principle in chemical manufacturing. This means that chemicals are introduced to the market before toxicological due diligence is completed. Most of the time it takes someone getting extremely sick for manufacturers to even begin to pay attention.
More often than not, military bases have their own underground private wells that provide drinking water to families living on base, rather than being apart of a public drinking water system. Fire fighting foam can either directly percolate into soil, or run off into surrounding surface water sources. Water from contaminated soil naturally recharges on-base drinking water wells, which families consume on a daily basis.
What Is The Department of Defense Doing About Per and Polyfluoroalkyl Substances (PFAS) on Military Bases?
The most recent data provided by the DOD stated that 99% people receiving non-DOD-treated water were served by systems with no violations, whereas only 89% of people receiving DOD-treated water were served by systems with no violations. It’s important to note that these data are from bases that voluntarily tested for PFAS chemicals in water, but they do however reiterate that military bases have higher concentrations of this contaminant than other areas in the country. In October of 2017, the US Government Accountability Office reported that the Department of Defense has taken action on PFAS. DOD has directly shut down wells or provided filtration to 11 military installations. This is definitely a step in the right direction, but there are over 400 military bases in the United States that are still contaminated. Approximately 3 million people in the US drink water provided by the DOD. Not only are active military personnel at risk, husbands, wives and children are being adversely impacted by PFAS chemicals in water. Again, manufacturers of these dangerous chemicals are mostly to blame for such high concentrations of PFAS contamination on military bases.
What Are Public Officials Doing About Per and Polyfluoroalkyl Substances (PFAS)?
EPA set a Lifetime Health Advisory Level of 70 parts per trillion for both PFOA and PFOS. The rule of thumb for PFAS is that the sum of the category of contaminants should be no higher than 70 parts per trillion. ATSDR believes this level should be reduced to 20 parts per trillion for drinking water. Again, Lifetime Health Advisory Levels and Minimum Risk Levels are non-enforceable limits that municipalities are not required to follow. DOD has not developed their own standard for PFAS in drinking water and therefore follow the non-enforceable national level of 70 parts per trillion. DOD is not at all incentivized to create a standard or even test for PFAS, because of the outrageous mitigation expenses.
Other Articles We Think You Might Enjoy:PFAS: What You Need To Know
Recap of EPA's 2018 PFAS National Leadership Summit
PFAS: Toxicological Profile
Why Does Washington, DC Water Taste Bad Right Now?
Analies Ross-Dyjak | Water Nerd
**Updated March 24, 2020 to include new chlorine switch dates
Our Water Nerds have received a ton of questions about a noticeable change in the taste and smell of Washington DC's tap water. While we've heard lots of interesting hypotheses, what's really happening is that the Washington Aqueduct (where DC Water purchases water from) has recently switched over its disinfectants from chloramine to chlorine, for an annual "spring cleaning" of the distribution lines. DC residents can expect funky-tasting water from March 23-May 4, 2020.
How Are Chloramine and Chlorine Different?
We answer this question in much more detail in a different post, but here's the skinny on chlorine in drinking water: Like a growing number of US cities, Washington, DC uses chloramine as the primary disinfectant for a couple of reasons:-
Chloramine persists longer in the distribution system, so it does a better job killing bacteria in areas of the water distribution system that are near the end of the pipes, or don't have as high of flow as other areas.
-
It forms fewer disinfection byproducts in the presence of organic matter.
-
Chloramine-treated water doesn't have as strong of a taste as chlorine-treated water.
While these are all great reasons to use chloramine, most cities that use chloramine undergo a more aggressive disinfection cycle for a few weeks each year (aka "Spring Cleaning").
What Are The Impacts of Switching to Chlorine?
People often find that the water tastes and smells like pool water during the disinfectant switch, in addition to your bathroom smelling like swimming pool's locker room after showering. If you want to fix this problem... you have a couple of options that don't involve bottled water (horrible for the environment and less regulated than tap water!).-
Get a water filter that's designed to handle it (and lead, chromium 6, VOCs...)!
-
If you let chlorinated tap water sit in a pitcher overnight, a good amount of the chlorine taste and smell will go away. However, many people find that the water tastes "stale" when this happens (from the less volatile disinfection byproducts).
When Will Washington, DC's Water Switch Back Over to Chloramine?
The "Spring Cleaning" period is scheduled to take place from March 23 until May 4, 2020. After May 4, the water utility provider will switch the disinfectant back over to chloramine. Until then... non-Hydroviv users will just have to hold their noses!
Other Great Articles We Think You'll Love:Tap Water Chlorination: The Good, The Bad, The Unknown
What Are Disinfection Byproducts and Why Should I Care?
Fluoride in Municipal Tap Water: What You Need To Know
Problems We Found In Milwaukee's Drinking Water
Analies Dyjak | Policy Nerd
For Hydroviv’s assessment of Milwaukee, Wisconsin’s drinking water, we collected water quality test data from the city and the U.S. Environmental Protection Agency. We cross referenced their water quality data with toxicity studies in scientific and medical literature. The water filters that we sell at Hydroviv are optimized to filter out contaminants that are found in Milwaukee’s drinking water.
Where Does Milwaukee Source Its Drinking Water?
Milwaukee sources its drinking water from Lake Michigan. This surface water source has had a long history of pollution, including recent lawsuits involving Chromium 6 releases from an abutting steel facility.
Chromium 6 In Milwaukee’s Drinking Water
Chromium 6 is a highly toxic metal that is currently unregulated by the EPA. In recent years, Milwaukee has had a major problem with this dangerous contaminant. Chromium 6 pollution is associated with metal processing, tannery facilities, chromate production, stainless steel welding, and pigment production. This years water quality report for Milwaukee detected levels of Chromium 6 as high as 0.2 parts per billion. This concentration is 10 times higher than the concentration determined to have a negligible impact on cancer risk. EPA has acknowledged that Chromium 6 is a known human carcinogen through inhalation, but is still determining its cancer potential through ingestion of drinking water. Lung, nasal and sinus cancers are associated with Chromium 6 exposure. Ingestion of extremely high doses of chromium 6 compounds can cause acute respiratory disease, cardiovascular, gastrointestinal, hematological, hepatic, renal, and neurological distress which may result in death.
Lead In Milwaukee's Drinking Water
In recent years, Milwaukee has had a problem with lead in drinking water. Lead enters tap water through old lead service pipes and lead-containing plumbing. 10% of sites that were tested for lead had concentrations over 7.2 parts per billion. The highest concentration detected in 2017 was 130 parts per billion, which is a whopping 8.6 times higher that the Federal Action Level of 15 parts per billion. Environmental Protection Agency, Center for Disease Control and American Academy of Pediatrics all recognize that there is no safe level of lead for children. These health and regulatory organizations are trying to reduce the allowable limit to 1 part per billion, so a concentration of 130 parts per billion is of serious concern. Additionally, these measurements may not be a true indication of your tap water if your home has lead plumbing or lead fixtures. Treated water leaving the plant may be in compliance with loose EPA standards, but could become contaminated once it enters older infrastructure. Houses built before 1986 were most likely built with lead plumbing and lead fixtures. Lead exposure can cause developmental issues, lowered IQ, and damages to the kidneys and brain.
Perfluorinated Compounds In Milwaukee's Drinking Water
This years water quality report for Milwaukee included test data from six Perfluorinated Compounds (PFCs). Perfluorinated Compounds are associated with firefighting foam, non-stick cookware, Scotchguard and other solvents from manufacturing. The two PFCs that are the most well known and the most researched are Perfluorooctanoic acid (PFOA) which was detected at 2.1 parts per trillion and Perfluorooctane-sulfonic acid (PFOS) which was detected at 2 parts per trillion. The Agency for Toxic Substances and Disease Registry recently recommended setting a Minimum Risk Level of 20 parts per trillion for both of these chemicals. These data are preliminary and the effects to human health are still unknown. This category of chemicals are “emerging contaminants” which means they are thought to pose a potential threat to human health and the environment, but haven't yet been regulated. Perfluorinated Compounds contribute to environmental contamination largely due to the fact that they are highly resistant to degradation processes, and thus persist for many years in water, air and can enter the food chain via bioaccumulation in certain animal species.
Chloramine In Norman’s Drinking Water
While most municipalities use chlorine as the primary drinking water disinfectant, Milwaukee’s drinking water is disinfected with chloramine. Chloramine is primarily responsible for what many customers report as the “bad taste” or “pool smell” of tap water. Unlike chlorine, chloramine does not dissipate if a container of water is left in the refrigerator overnight. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Milwaukee use a special filtration media that is purposefully designed to remove chloramine.
It’s important to note that only a handful of contaminants are required to be included in annual Consumer Confidence Reports, and that there are hundreds of potentially harmful unregulated contaminants that aren’t accounted for. If you’re interested in learning more about water filters that have been optimized for Milwaukee’s tap water quality, feel free to visit www.hydroviv.com to talk to a Water Nerd on our live chat feature or send us an email at hello@hydroviv.com.
Other Articles We Think You Might Enjoy:Lead Contamination In Drinking Water
5 Things To Know About Chromium 6 In Drinking Water
Perfluorinated Compounds In Drinking Water
Superfund: Spencer, Indiana
Analies Dyjak | Policy Nerd
This week, Hydroviv is highlighting the six new National Priorities List (NPL) sites under the EPA Superfund program. Superfund sites are home to high levels of hazardous soil and groundwater contamination from years of improper disposal techniques. If you’d like to learn more about the ins and out of Superfund, check out our recap HERE. The next Superfund site that we’ll be discussing is located in Spencer, Indiana.
Spencer, Indiana is home to another newly designated Superfund site. The municipal well field is a contaminated chlorinated solvent plume, with levels exceeding federal standards for Tetrachloroethylene or PCE. In a 2012 carcinogenicity assessment, EPA set a Maximum Contaminant Level (MCL) of 5 parts per billion for drinking water. Long term exposure of PCE can cause adverse effects to the liver, kidneys and central nervous system. The Indiana Department of Environmental Management has yet to identify a responsible party for the contamination, but they have recognized 9 active and closed facilities that could be major contributors.
If you live near a Superfund site and are concerned about your water, drop us an email at hello@hydroviv.com or visit hydroviv.com and use our live chat feature. Hydroviv is staffed with scientists and policy experts that can help you make sense of your water and find an effective filter, even if it isn’t one we sell.
Other Articles We Think You Might Enjoy:Newly Designated Superfund Sites
What is Superfund?
Superfund: San Antonio