Water Quality Reports

**Updated May 3, 2021 to include Houston's most recent Consumer Confidence Report.
Analies Dyjak  |  Policy Nerd

Source Of Houston Drinking Water

A majority of Houston drinking water comes from the San Jacinto River, which has a long history of pollution. Remaining source water comes from the Evangeline and Chicot Aquifers. The aftermath of Hurricane Harvey caused a Superfund site (with high levels of Dioxin) to spill into the San Jacinto River. Raw water is then purified at three surface water treatment plants and 40 groundwater treatment plants. 16 supplementary groundwater plants provide water for the remaining 5 Houston systems.

Per and Polyfluoralkyl Substances (PFAS) In Houston Drinking Water

PFAS are a category of chemicals found in various non-stick/stain resistant products, as well as fire fighting foam. PFAS are considered to be "emerging contaminants" because they are not currently regulated by EPA, but are known to be toxic and persistent in the environment. Most municipalities are not required to test for, or remove, PFAS from drinking water. Elevated levels of PFAS have been identified in areas around the San Jacinto River, so it's likely in Houston tap water. Not all filters are designed to remove PFAS from drinking water. If you'd like find water filters that remove PFAS from tap water, check out this Duke/NC State study. 

Arsenic Concentrations In Houston Drinking Water

Arsenic is a toxic heavy metal that is known to cause cancer and other health issues. Unlike lead, which distributes into water from plumbing, arsenic comes from the source water itself. The highest detected concentration of arsenic in Houston's main system was 8 parts per billion. While the average of 2.3 parts per billion is within EPA's regulated threshold, these levels triggered the municipality to make the following disclosure in the Consumer Confidence Report:

"Houston’s drinking water contains low levels of arsenic, but is below the state and federal action levels. EPA’s standard balances arsenic’s possible health effects against the costs of removing it from drinking water. EPA continues to research the health effects of low levels of arsenic, which is a mineral known to cause cancer in humans at high concentrations and is linked to other health effects such as skin damage and circulatory problems."

Hydroviv strongly recommends that anyone that lives in an area with more than 1 part per billion take steps to remove arsenic from their water, especially families with children.

Lead Levels In Houston Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing. When lead pipes, fittings, and valves are present in a home, lead can leach into the drinking water, and can reach dangerous levels. In the most recent data provided by the City of Houston, 10% of samples analyzed for lead in Houston are 4 parts per billion. Though the city is currently in compliance with extremely loose federal regulations, the EPA and CDC have both acknowledged that there is no safe level of lead for children. Additionally, the American Academy Of Pediatrics strongly urges any tap that produces water over 1 part per billion be addressed. Hydroviv Undersink filters are NSF/ANSI 53 certified to remove lead from drinking water.

Very High Chromium 6 Levels In Houston Drinking Water

Chromium 6 is an extremely toxic metal that is not currently regulated by the EPA. In recent years, Houston tap water has averaged 747 parts per trillion for Chromium 6. For the sake of perspective, these levels are 35 times higher than the concentration determined to have negligible impact on cancer risk. Earlier this year, Dr. Eric Roy (Hydroviv's Founder) wrote a highly-cited article specifically on the high levels of chromium 6 in Houston's tap water, the original source can be viewed here.

Pesticides And Petroleum Hydrocarbons Detected In Houston's Most Recent Round Of Testing

Low levels of the herbicides atrazine and simazine (both endocrine disruptors), as well as xylenes (a petroleum based VOC) were reported in Houston's main system. 

Disinfection Byproducts (DBPs) In Houston Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA's website discloses that exposure to high levels of these chemicals is associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. The levels of both categories of regulated DBPs (TTHMs and HAA5) were elevated in Houston tap water. 

Chlorine Levels In Houston Tap Water

Like most other cities in the U.S., Houston disinfects its water with chlorine to protect against waterborne illness. While not considered to be harmful on its own at levels found in tap water, people tend to find that filtering it from their water greatly enhances its taste and odor.

Still Have Questions About Houston Tap Water Or Water Quality In General?

Hydroviv is a water filtration company that uses tap water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Houston, but our filters provide broad protection against a wide range of contaminants found in Houston's tap water.

If you’re interested in learning more about water filters that have been optimized for Houston's water, or have questions about our Houston water quality report, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on tap water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople on staff).

Please Share This Houston Water Quality Report Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You:
How Did Hydroviv Filters Perform In A Duke University PFAS Study?
How Do I Remove Chromium 6 From My Tap Water?
What Are The Common Problems With Reverse Osmosis Filters?

Emma Schultz, M.S.  |  Scientific Contributor
**Updated May 30, 2021 to include current data

Our Water Nerds have updated our assessment of St. Petersburg drinking water to include the most current data. To do this, we aggregated water quality test data Water Resources Department, the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. Our team is then able to cross reference these data with toxicity studies in scientific literature. The water filters that we sell in St. Petersburg are optimized with this information in mind. 

Source Of St. Petersburg Drinking Water

The City of St. Petersburg gets drinking water from a mix of groundwater and surface water sources. St. Petersburg is part of Tampa Bay Water, along with six other regional members. Groundwater originates from eleven well fields from the Floridan aquifer. Surface-based water comes from the Alafia River, the Hillsborough River, the C. W. Bill Young Regional Reservoir, and the Tampa Bypass Canal. 

Lead In St. Petersburg Drinking Water

Lead enters into St. Petersburg consumer's tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (as recently witnessed in Flint, Michigan), lead leaches into the drinking water, reaching toxic levels. Recent analysis for lead in St. Petersburg found an average of 1.6 parts per billion. EPA, CDC and the American Academy of Pediatrics all recognize that there is no safe level of lead for children. Federal regulations cannot possibly take into account levels measured at an individual tap.

Chromium 6 In St. Petersburg Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. St. Petersburg’s tap water recently averaged 82 parts per trillion for chromium 6. These levels are 4 times higher than the concentration determined to have a negligible impact on cancer risk.

Use Of Chloramine In St. Petersburg Tap Water

While most cities use chlorine as the primary disinfectant, St. Petersburg’s water is disinfected with chloramine, which is made by combining chlorine and ammonia. Chloramine is the frequent issue when customers report a “bad taste” in their tap water, and unlike chlorine will not fade away if left in the fridge overnight. The recent chloramine running annual average for St. Petersburg was 3.81 parts per million, with samples ranging as high as 6.6 ppm; the maximum residual disinfectant level, in comparison, is only 4.0 ppm. Most one-size-fits-all water filters use filtration media that don’t adequately remove chloramine, but the filters that Hydroviv builds for St. Petersburg use special filtration media that are purpose-built to remove chloramine as well.

Still Have Questions About St. Petersburg’s Tap Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The chemicals that we list above are what we consider to be “points of emphasis” so we can build the best water filter for St. Petersburg tap water, but all of our water filters provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, heavy metals [including lead], pharmaceuticals, solvents, pesticides, mercury).

If you’re interested in learning more about water filters that have been optimized for St. Petersburg tap water, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook.

Please Share This City of St. Petersburg water Quality Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You
What Should I Know About Lead Contamination And Lead Poisoning?
 Things About Chromium 6 Contamination In Drinking Water
Does Boiling My Water Remove Chromium 6 Or Arsenic?
Why Does EPA Allow Toxic Chemicals In Drinking Water?

Kezia Snipe | Hydroviv Research Analyst

**Updated May 30, 2021 to reflect most current water quality data

For Hydroviv’s assessment of Memphis' water quality, we aggregated water quality test data from Memphis Light, Gas & Water, the city’s water provider and the U.S. Environmental Protection Agency (EPA). We cross reference these data with toxicity studies in the scientific and medical literature, and delve into upcoming regulatory changes. The water filters that we offer at Hydroviv are optimized with these figures in mind.

Source Of Memphis Drinking Water

Memphis tap water comes from the Memphis Aquifer, which is a natural underground reservoir located from 350 to 1,100 feet below ground surface. It is a part of a larger system of aquifers extending to a depth of 2,600 feet. The aquifers are composed of layers of clay, sand and gravel that act as a natural filter to remove many impurities from the water, which is contained within the sands. The wells connected into this system are commonly known as “artesian wells” because they draw the naturally purified water to the surface by releasing the built-up pressure which forces the water up the well like liquid through a straw.

Lead in Memphis Tap Water

Lead levels in Memphis, Tennessee tap water are higher than what health officials claim to be safe. The current lead levels in Memphis water are 8.72 parts per billion. Although the EPA Action Level is 15 parts per billion, EPA's Maximum Contaminant Level Goal is 0 parts per billion. Lead enters tap water from older lead service pipes and plumbing. According to the American Academy of Pediatrics, there is no safe level of lead - and any amount can cause developmental issues, lowered IQ, and other impacts to the brain. 

Use of Chlorine in Memphis Tap Water

Like most cities in the United States, Memphis adds chlorine to its water supply to keep consumers safe from waterborne illness. While chlorine is not necessarily harmful, it can make tap water taste and smell very unpleasant. When you choose to filter chlorine from 

Disinfection Byproducts (DBPs) In Memphis Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA has admitted that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About Memphis Drinking Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Memphis, but all of our our filters provide broad protection against a wide range of contaminants (including lead).

If you’re interested in learning more about water filters that have been optimized for Memphis tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople).

Please Share This Memphis Water Quality Article On Social Media With Anyone You Think Would Benefit From The Information!

Kezia Snipe  |  Hydroviv Research Analyst

For Hydroviv’s Bellevue water quality report, we aggregated water quality test data from City of Bellevue Utilities, the city’s water provider, and the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. We cross reference these data with toxicity studies in scientific and medical literature, and look at upcoming regulatory changes. The water filters that we build for people who live in Bellevue are optimized with these figures in mind.

Source Of Bellevue Drinking Water

The City of Bellevue’s water comes from the Cedar River and the south fork of the Tolt River. The water is purchased through Cascade Water Alliance (Cascade), which purchases its water from Seattle Public Utilities. Cascade also owns Lake Tapps, which can serve as a future source of water if needed.

Lead Levels In Bellevue Drinking Water

Lead enters into a consumer’s tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (such as what happened in Flint, Michigan), lead leaches into the drinking water and can reach toxic levels. Recent analysis for lead in city of Bellevue's water quality revealed an average of 4.4 parts per billion. While the regulatory limit is 15 ppb, both the EPA and CDC recognize that there is no such thing as a safe level of lead. Of course, federal regulations cannot take into account levels measured at an individual tap.

Chromium 6 Levels In Bellevue Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. In recent years, Bellevue’s tap water has averaged 110 parts per trillion for Chromium 6. While the city of Bellevue's water quality is in compliance with nonexistent federal and very loose state regulations, these levels more than 5 times higher than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Bellevue Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA website discloses that high levels of disinfection byproducts in drinking water are are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About Bellevue Tap Water Or Water Quality In General?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Bellevue, but our filters provide broad protection against a wide range of additional contaminants found in Bellevue's tap water.

If you’re interested in learning more about water filters that have been optimized for Bellevue, visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople on staff).

Please Share This Bellevue Water Quality Report Article On Social Media With Anyone You Think Would Benefit From The Information!

Emma Schultz, M.S.  |  Scientific Contributor
**Updated June 18, 2021 to include current data

For our assessment of Winston-Salem’s tap water quality, we aggregated water quality test data from the Winston-Salem/Forsyth County Utility Commission, the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. Our Water Nerds cross reference these data with toxicity studies in scientific and medical literature, and look at upcoming regulatory changes. The water filters that we sell in Winston-Salem are optimized to remove the contaminants that were detected.

Source Of Winston-Salem Drinking Water

Winston-Salem’s drinking water is surface water-based, with water coming from both the Yadkin River and from Salem Lake. Water is treated at one of the three water treatment facilities operated by the City/County Utility Commission.

Lead In Winston-Salem Drinking Water

Lead enters consumer tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (such as recently happened in Flint, Michigan), lead leaches into drinking water and can reach toxic levels. According to the most recent Winston-Salem water quality analysis the 90th percentile concentration of 53 sampled sites of less than 3 parts per billion for lead in drinking water. While the Action Level is 15 parts per billion, the EPA, CDC and the American Academy of Pediatrics all recognize that there is no safe level of lead for children. And of course, federal regulations cannot take into account levels measured in an individual home’s tap.

Per and Polyfluoroalkyl Substances (PFAS) In Hampton Drinking Water

PFAS are a class of chemicals found in various non-stick and stain resistant products, as well as fire fighting foam. PFAS are considered to be "emerging contaminants" because they are not currently regulated by EPA, but are known to be toxic and persistent in the environment. PFAS have historically been an ingredient in fire fighting foam, which is why they're often found on or near military bases. Most municipalities don't test for PFAS, including Winston-Salem. Hydroviv undersink filters remove PFAS. If you'd like to check out third-party data on our removal rates, send us an email at hello@hydroviv.com.

Chromium 6 In Winston-Salem Drinking Water

Chromium 6 is a highly toxic metal that, while monitored, is not regulated by the EPA. Winston-Salem’s tap water quality recently averaged 52 parts per trillion for chromium 6. These average levels are 2.6 times higher than the concentration determined to have a negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Winston-Salem Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not well regulated, the EPA has stated that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. EPA regulates two types of DBPs: Total Trihalomethanes (TTHMs) and Halo Acetic Acids 5 (HAA5). TTHMs in Winston-Salem’s tap water had a 2020 Local Running Annual average of 53.4 parts per billion. Consumers may be interested to know that levels of TTHMs ranged as high as 98.8 parts per billion, while the EPA’s Maximum Residual Disinfectant Level (MRDL) is only 80 parts per billion. Although these upper range values are well above the MRDL, this is not an EPA violation, since local running annual averages are used for comparison.

Use Of Chlorine In Winston-Salem Tap Water

Like most cities in the United States, Winston-Salem adds chlorine to its water supply to keep consumers safe from waterborne pathogens. While not considered harmful at low levels, many people find that removing the chlorine from their water supply results in a taste and odor improvement. When you choose to filter your tap water, we believe you will notice an immediate taste enhancement.

Still Have Questions About Winston-Salem’s Tap Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The chemicals that we list above are what we consider to be “points of emphasis” so we can build the best water filter for Winston-Salem’s tap water, but all of our water filters provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, heavy metals [including lead], pharmaceuticals, solvents, pesticides, mercury).

If you’re interested in learning more about water filters that have been optimized for Winston-Salem tap water, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook.

Other Articles We Think You Might Enjoy:
What Do I Need To Know About Lead Contamination And Lead Poisoning?
How To Filter Chromium 6 From Drinking Water
What Do I Need To Know About Disinfection Byproducts?
Are TDS Meters Are A Marketing Gimmick?