*Updated 10/7/2022 to Include Most Recent Data*

Christina Liu | Hydroviv's Science Team

Miami-Dade County Water Department (MCWD) delivers drinking water to over 2.3 Million people each day. MCWD operates three regional water treatment plants: Alexander Orr, Jr., John E. Preston and Hialeah. There are five smaller water treatment plants which make up the South Dade Water Supply System and the Hialeah Reverse Osmosis Water Treatment Plant. For Hydroviv’s assessment of Miami-Dade County’s drinking water, we aggregated water quality test data from Miami-Dade County’s Water and Sewer Department, the U.S. Environmental Protection Agency (EPA), the Environmental Working Group, and the US Geological Survey. Our Water Nerds then cross referenced these data with toxicity studies in the scientific and medical literature, as well as upcoming regulatory changes. The custom water filters that we build for our customers in Miami are optimized with this research in mind.

Source of Miami-Dade County’s Drinking Water

Miami-Dade’s primary source of drinking water is groundwater from wells. The wells withdraw primarily from the Biscayne Aquifer with a limited number of wells withdrawing from the Floridan Aquifer. The Biscayne Aquifer is located just below the land surface in South Florida and is composed of a porous rock with small cracks and holes through which rainwater seeps and fills.

What Are The Major Concerns in Miami-Dade County’s Drinking Water?

Contaminants of concern in the Miami-Dade County’s drinking water include Lead, PFAS, Disinfection Byproducts, Radium, Uranium, Arsenic, and Chromium 6. Chloramine is used to disinfect the water.

Lead In Miami-Dade County’s Drinking Water

In 2018, Hydroviv’s Founder and Chief Scientist was interviewed by The Miami Times and discussed the issue of lead in the drinking water tested in homes in the Miami-Dade County area.  

Lead enters into the consumer's tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (as witnessed in Flint, Michigan), lead leaches into the drinking water, reaching toxic levels. 2021 lead sampling by the Miami-Dade County Water Department detected levels as high as 3.6 parts per billion. EPA, CDC and the American Academy of Pediatrics all recognize that there is no safe level of lead for children. In addition, Federal regulations cannot take into account levels measured at an individual tap.

PFAS in Miami-Dade County's Drinking Water

Per and Polyfluoroalkyl Substances (PFAS) are a category of emerging contaminants commonly used in firefighting foam, Teflon, non-stick surfaces, stain-resistant surfaces, and food packaging. The Agency for Toxic Substances and Disease Registry (ATSDR) has determined that PFAS exposure is associated with various adverse health effects, including an increased risk of cancer, lowered fertility rates, and developmental issues in infants and young children. A new study out of The Yale School of Public Health recently found that exposure to PFAS increases the risk of miscarriage by 80-120% in pregnant women. The Centers for Disease Control also issued a disclosure regarding a potential intersection between PFAS and COVID-19.

Even small amounts of PFAS are extremely toxic. PFAS are measured in parts per trillion, and one part per trillion is equivalent to one drop of water in 20 Olympic-sized swimming pools.

PFAS have been detected in a growing number of municipalities across the United States. Miami-Dade County voluntarily tested the water for PFOS and PFOA, and the levels were measured to be as high as 36 ppt and 11 ppt, respectively. Not all water filters are designed to remove PFAS from tap water. If you'd like to find water filters that remove PFAS from tap water, check out this Duke/NC State PFAS study. Hydroviv filters are NSF/ANSI Standard 53 certified for PFOA/PFOS removal.

Disinfection Byproducts (DBPs) In Miami-Dade County’s Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants (added to the water supply to protect consumers) react with naturally-occurring organic matter. EPA regulates two categories of DBPs: Total Trihalomethanes (TTHMs) and Haloacetic Acids (HAA5). The EPA has stated that DBPs have been associated with increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. In 2021, Haloacetic Acid levels ranged as high as 54 parts per billion, nearing the EPA Maximum Contaminant Level of 60 parts per billion, while Total Trihalomethane levels ranged as high as 63 parts per billion, compared to the EPA Maximum Contaminant Level of 80 parts per billion.

Radium and Uranium in Miami-Dade County’s Drinking Water

Radium is formed when uranium and thorium undergo radioactive decay in the environment.   Two of the main radium isotopes found in the environment are radium-226 and radium-228. Radium in drinking water is of primary concern because this radiation may cause cancer, kidney damage and birth defects.  Radium levels in 2021 were reported to be as high as 1.4  ppb with the EPA Maximum Contaminant Level Goal 5 ppb.  Uranium levels measured as high as 11 ppb in 2021, with the EPA Maximum Contaminant Level Goal set at 30 ppb.  

Use Of Chloramine In Miami Tap Water

While most cities use chlorine as the primary disinfectant, all of the municipalities within Miami use chloramine, which is made by combining chlorine and ammonia. Chloramine is frequently the issue when customers report a “bad taste” in their tap water, and unlike chlorine will not fade away if left in the fridge overnight. The 2020 chloramine running annual average for the Miami-Dade County was 2.5  parts per million, with samples ranging as high as 5 ppm while the maximum residual disinfectant level, in comparison, is only 4.0 ppm. Most one-size-fits-all water filters use filtration media that don’t adequately remove chloramine, but the filters that Hydroviv builds for Miami-Dade county water use special filtration media that are purpose-built to remove chloramine as well.

Arsenic in Miami-Dade County Drinking Water

Arsenic is a hazardous heavy metal that can cause cancer and other health problems. Arsenic originates in source water naturally. 2021 Arsenic levels measured across the different water treatment systems ranged from 0.4 ppb to 2 ppb.  While Miami-Dade County’s Arsenic levels were not in violation of EPA water quality standards, consumers should know that the U.S. EPA's standard balances toxicity against the costs of removing arsenic from drinking water. We strongly suggest that tap water with levels higher than 1 part per billion be treated to remove arsenic, especially in homes with children.

Chromium 6 Levels In Miami-Dade County’s Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. Miami-Dade Water was measured to have Chromium 6 levels ranging from 38 parts per trillion to 170 parts per trillion.  California has determined that 20 parts per trillion is the contaminant level below which there is minimal health risk.  The Chromium 6 levels in the Miami-Dade County Water System range from about 2 to over 8 times the level generally accepted as safe.

How Can Hydroviv Help Me?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Miami-Dade County water, but all of our filters also include broad protection against a wide range of contaminants.

If you’re interested in learning more about water filters that have been optimized for Miami-Dade tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We post water-related news on Twitter, Instagram, and Facebook. 

Hydroviv's drinking water filters carry NSF certifications to Standard 42 (aesthetic effects-Chlorine Removal) and Standard 53 (health effects--Lead, VOCs, and PFOA/PFOS removal), and are independently tested to remove hundreds of contaminants.

Recommended Articles For You
Everything You Need To Know About PFAS Contamination in Tap Water
Problems We Found With Orlando Drinking Water
Drinking Water Problems in the Tampa Bay Region

Kezia Snipe  |  Hydroviv Research Analyst

Updated May 28, 2021 to reflect current water quality data

For Hydroviv’s City of Mesa, AZ Water Report we aggregated water quality test data from Mesa Water Resources, U.S. Environmental Protection Agency (EPA) and samples that we collect and analyze. We cross reference these data with toxicity studies in the scientific and medical literature, and delve into upcoming regulatory changes. The water filters that we offer at Hydroviv are optimized with these numbers in mind.

Sources Of Mesa Drinking Water

Mesa relies on two sources for its drinking water: surface water and groundwater wells. Salt and Verde River water from the Salt River Project (SRP) supplies water delivered in the City Zone. Colorado River water delivered through the Central Arizona Project (CAP) provides water delivered in the Eastern Zones. 16 deep aquifer wells supply drinking water throughout the City Zone. 14 deep aquifer wells supply drinking water throughout a wide area in Mesa’s Eastern Zones.

Arsenic In Mesa Drinking Water

Arsenic is a toxic metal that is known to cause cancer and other health issues. Unlike lead, which distributes into water from plumbing, arsenic comes from the source water itself. Mesa's water quality is in compliance with the EPA’s water quality standards but it’s important to point out that EPA’s standard balances the toxicity against the costs of removing arsenic from drinking water. The city’s most recent tap water quality report reported an average arsenic concentration up to 7.8 parts per billion. Hydroviv recommends that anyone with more than 1 part per billion take steps to remove arsenic from their water, especially if they have children.

Lead In Mesa Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing. When corrosion control measures put in place by the municipality fail (like what recently happened in Flint, Michigan), lead leaches into the drinking water, and can reach dangerous levels. Currently,10% of samples analyzed for lead in Mesa, AZ's water are 3.7 parts per billion. Though Mesa's water quality is in compliance with federal regulations, EPA and CDC both acknowledge that there is no safe level of lead, and federal regulations do not take into account levels measured at an individual tap. The American Academy of Pediatrics recommends that any taps used to serve children have lead levels no higher than 1 part per billion.

Extremely High Chromium 6 Levels In Mesa Drinking Water

Mesa's water quality has one of the highest levels of Chromium 6 in its' tap water in the entire country. Chromium 6 is a highly toxic metal that is not currently regulated by the EPA. In recent years, the city’s tap water has averaged 5600 parts per trillion for Chromium 6. For a bit of perspective, these levels are 280 times HIGHER than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Mesa Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA has admitted that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About Mesa Drinking Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Mesa, AZ's water, but all of our our filters provide broad protection against a wide range of contaminants (including lead).

If you’re interested in learning more about water filters that have been optimized for Mesa tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople).

Please Share This City of Mesa Water Report Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You
What Do I Need To Know About Arsenic In My Drinking Water
How Do I Remove Chromium 6 Contamination From My Drinking Water? 
Disinfection Byproducts In Your Drinking Water

Emma Schultz, M.S.  |  Scientific Contributor

For our Gilbert water quality report, we aggregated water quality test data from the City of Gilbert’s Water Quality Division, the U.S. Environmental Protection Agency (EPA), as well as from samples that we collect and analyze. We cross reference these data with toxicity studies in the scientific and medical literature, and look at upcoming regulatory changes. The water filters that we sell in Gilbert are optimized with these issues in mind.

Source Of Gilbert Drinking Water

Gilbert’s drinking water is both groundwater- and surface water-sourced. Surface water originates from the Salt River Project, with dams and reservoirs located on the Salt River and Verde River watersheds; and from the Central Arizona Project, drawing water from the Colorado River via Lake Havasu in a canal. All surface water is directed to one of Gilbert’s two water treatment plants, either the North Water Treatment Plant or the Santan Vista Water Treatment Plant. The Santan Vista plant is working to double its water production capabilities, which should be finished by early 2018. Groundwater is pumped as needed from 17 wells located throughout Gilbert, with ion exchange or adsorptive media used at some wells to reduce inorganic contaminant concentrations. In 2016, SRP provided 49% of the water used, while groundwater supplied 28% and CAP 23%.

Arsenic In Gilbert Drinking Water

Arsenic is a dangerous heavy metal known to cause cancer, among other health problems. Arsenic originates in source water. While the city of Gilbert's water report is in compliance with EPA water quality standards, consumers should take note that the EPA's standard balances toxicity against the costs of removing arsenic from drinking water; the standard is therefore quite high. The city of Gilbert's most recent water report listed average arsenic concentrations ranging from 3.2-9.1 parts per billion, with an average concentration of 6.43 ppb. Although this is a not an EPA violation, we strongly advocate that tap water with more than 1 part per billion be treated to remove arsenic, especially if there are children in the home.

Lead In Gilbert Drinking Water

Lead enters consumer tap water through old lead service pipes and lead-containing plumbing. When corrosion control measures fail (such as recently happened in Flint, Michigan), lead leaches into drinking water and can reach toxic levels. Recent analysis for lead in Gilbert found a 90th percentile concentration of 1.33 ppb, with an upper range limit of 2.9 ppb. While the Action Level is 15 ppb, both the EPA and CDC recognize that there is no such thing as a safe level of lead. In addition, federal regulations cannot possibly take into account levels measured at an individual tap.

Very High Levels Of Chromium 6 In Gilbert Drinking Water

Chromium 6 is a highly toxic metal that, while monitored, is not regulated by the EPA. Gilbert’s tap water recently averaged 5900 parts per trillion for chromium 6. These average levels are a staggering 295 times higher than the concentration determined to have a negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Gilbert Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not well regulated, the EPA has stated that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems. DBPs in Gilbert’s tap water had a 2016 local running annual average of 48.0089 parts per billion. It should be noted that levels of Total Trihalomethanes ranged as high as 110 ppb, while the EPA’s Maximum Residual Disinfectant Level is only 80 ppb. While over the MRDL, this is not an EPA violation since local running annual averages are used for comparison.

Use Of Chlorine In Gilbert Tap Water

Like most cities in the United States, Gilbert adds chlorine to its water supply to keep consumers safe from waterborne pathogens. While not considered harmful in low concentrations, many people find that removing the chlorine from their water supply results in a taste and odor improvement. When you choose to filter your tap water, we believe you will notice an immediate taste enhancement.

Still Have Questions About Gilbert’s Tap Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The chemicals that we list above are what we consider to be “points of emphasis” so we can build the best water filter for Gilbert tap water, but all of our water filters provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, heavy metals [including lead], pharmaceuticals, solvents, pesticides, mercury).

If you’re interested in learning more about water filters that have been optimized for Gilbert tap water, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook.

Please Share This City of Gilbert Water Report On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You

Kezia Snipe  |  Hydroviv Research Analyst
**Updated June 25, 2021 to include current data

Our team has updated our assessment of Hampton drinking water to include the most current available data. To do this, we've aggregated water quality test data from Newport News Waterworks Department, the U.S. Environmental Protection Agency (EPA), as well as samples that we collect and analyze. We cross reference these data with toxicity studies in scientific and medical literature, and look at upcoming regulatory changes. The water filters that we offer at Hydroviv are optimized to remove contaminants in Hampton, Virginia drinking water.

Source Of Hampton Drinking Water

Hampton supplies its drinking water from both surface and groundwater sources. The surface supply comes from the Chickahominy River. Supplementary groundwater is supplied from wells in the Lee Hall area. Waterworks owns and operates five reservoirs that store and supply water to the treatment plants. The two source waters are treated separately, then blended together before being distributed to Hampton residents. 

Per and Polyfluoroalkyl Substances (PFAS) In Hampton Drinking Water

PFAS are a class of chemicals found in various non-stick and stain resistant products, as well as fire fighting foam. PFAS are considered to be "emerging contaminants" because they are not currently regulated by EPA, but are known to be both toxic and persistent in the environment. PFAS have historically been an ingredient in fire fighting foam, which is why they're often found on or near military bases. The Langley Air force Base Hampton detected PFAS levels between 26,000-220,000 parts per trillion, which are upwards of 11,000 times higher than advisory levels. Hydroviv undersink filters remove PFAS. If you'd like to check out third-party data on our removal rates, send us an email at hello@hydroviv.com.

Lead In Hampton Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing. When corrosion control measures put in place by the municipality fail (like what happened in Flint, Michigan), lead leaches into the drinking water, and can reach dangerous levels. Currently, the 90th percentile for lead in Hampton drinking water is around 1 part per billion. Though the city of Hampton's water quality is well within in compliance with federal regulations, the EPA, CDC and The American Academy of Pediatrics all acknowledged that there is no safe level of lead for children. Additionally, if your home was built before 1986, you most likely have internal lead pipes and plumbing.

Chromium 6 In Hampton Drinking Water

Chromium 6 is an extremely toxic metal that is not currently regulated by the EPA. In recent years, Hampton tap water averaged 90 parts per trillion. For the sake of perspective, these levels are nearly 5 times higher than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Hampton Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA has admitted that they are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Still Have Questions About Hampton Drinking Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each customer's water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Hampton, but all of our our filters provide broad protection against a wide range of contaminants (including lead).

If you’re interested in learning more about water filters that have been optimized for Hampton tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople).

Please Share This City of Hampton Water Quality Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You

How Do I Remove Chromium 6 Contamination From My Drinking Water?
Disinfection Byproducts In Your Drinking Water

**Updated April 24, 2021 to include current data
Kezia Snipe  |  Hydroviv Research Analyst

Our Water Nerds have updated our assessment of Austin drinking water, to include the most recent data provided by the city. We use data from Austin Water Utilities, the U.S. Environmental Protection Agency (EPA) as well as from samples that we collect and analyze. Our Water Nerds then reference these data with toxicity studies in the scientific and medical literature to determine potential susceptibilities. The custom water filters that we offer at Hydroviv are optimized to remove contaminants in Austin drinking water. 

Source Of Austin Drinking Water

Austin gets its drinking water from the Colorado River, as it flows into Lake Travis and Lake Austin. This water is then treated at one of three treatment plants before being distributed to Austin residents.

PFAS In Austin Drinking Water

Per and Polyfluoroalkyl Substances or PFAS are a category of chemicals found in various non-stick/stain resistant products, as well as fire fighting foam. PFAS are considered to be "emerging contaminants" because they are not currently regulated by EPA, but are known to be toxic, carcinogenic, and persistent in the environment. High levels of PFAS have been detected in Austin, specifically at the former Bergstrom Air Force Base located a few miles away from the Colorado River. The levels detected at the Bergstrom Air Force Base are 142 times higher than the public health threshold determined by EPA. Most municipalities don't test for or remove PFAS from tap water, and most water filters are not designed to remove PFAS. If you'd like to find water filters that remove PFAS, check out this recent Duke/NC State study. 

Lead In Austin Drinking Water

Lead enters tap water through older lead service pipes and lead-containing plumbing. When corrosion control measures put in place by the municipality fail (like what recently happened in Flint, Michigan), lead leaches into the drinking water, and can reach dangerous levels. Currently, 10% of samples analyzed for lead in Austin are 1 parts per billion. Though Austin's drinking water is in compliance with federal regulations, EPA, CDC and the American Academy of Pediatrics all acknowledge that there is no safe level of lead for children. Hydroviv Undersink and filters are NSF/ANSI certified to remove lead from drinking water. 

Chromium 6 Levels In Austin Drinking Water

Chromium 6 is a highly toxic metal that is not regulated by the EPA. In recent years, Austin’s tap water has averaged 175 parts per trillion for Chromium 6. For a bit of perspective, these levels are 8.75 times higher than the concentration determined to have negligible impact on cancer risk.

Disinfection Byproducts (DBPs) In Austin Drinking Water

DBPs are a category of emerging contaminants that form when chlorine-based disinfectants react with naturally-occurring organic matter. Although these chemicals are not currently regulated very well, the EPA website discloses that high levels of disinfection byproducts are associated with an increased risk of bladder cancer, as well as kidney, liver, and central nervous system problems.

Chloramine In Austin Drinking Water

While most municipalities use chlorine as the primary disinfectant, Austin’s drinking and tap water is disinfected with chloramine (produced by mixing chlorine and ammonia). Chloramine is primarily responsible for what many customers report as the “bad taste” of tap water, and unlike chlorine does not dissipate if a container of water is left in the refrigerator overnight. Most one-size-fits-all water filters use filtration media that doesn’t do a great job removing chloramine, but the filters that we design and build at Hydroviv for Austin's water uses special filtration media that is purposefully designed to remove chloramine as well.

Still Have Questions About Austin Tap Water?

Hydroviv is a water filtration company that uses water quality data to optimize water filters for each city’s water. The contaminants that we list above are what we consider to be major “points of emphasis” that we use to build water filters that are built specifically for Austin's tap water, but all of the home water filtration systems that we build provide broad protection against other contaminants commonly found in drinking water (e.g. VOCs, heavy metals [including lead], pharmaceuticals, solvents, pesticides, mercury).

If you’re interested in learning more about water filters that have been optimized for Austin's tap water, or just have questions about water quality in general, feel free to visit www.hydroviv.com, reach out by email (hello@hydroviv.com) or through our live chat. We also frequently post water-related news on Twitter or Facebook. We pride ourselves in being a reputable source of information on water quality, and your questions will be answered by scientists, not salespeople (we don't have any salespeople).

Please Share This Austin Drinking Water Article On Social Media With Anyone You Think Would Benefit From The Information!

Recommended Articles For You